Recent content by meholmaniv

  1. M

    L2800 HST 4wd - Running, stalled, turns over, will not restart, no power to stop solenoid

    Bypassed the OPC and it started right up. Thanks to anyone who took the time to comment. Anyone know if there is an issue with this fix (safety aside)?
  2. M

    L2800 HST 4wd - Running, stalled, turns over, will not restart, no power to stop solenoid

    checked with ohm meter - all 3 good
  3. M

    L2800 HST 4wd - Running, stalled, turns over, will not restart, no power to stop solenoid

    Thank you for the link to the manual. Any help is appreciated.
  4. M

    L2800 HST 4wd - Running, stalled, turns over, will not restart, no power to stop solenoid

    Understood - I tested and got a short on A-C and A-B in the positions stated. So think that is ok. Tried to test the OPC, connected to battery per instructions (used amp meter instead of bulb) and did not see 4amps? Maybe no good. sketchy setup. Was confused because I do not see a stop relay...
  5. M

    L2800 HST 4wd - Running, stalled, turns over, will not restart, no power to stop solenoid

    Tractor stalled abruptly, battery strong and turned over but would not restart. Tried to bleed with little bleed valve and then injectors, saw nothing. 1) checked fuses at battery w ohm meter 2) checked fuses in black box under steering wheel w ohm meter 3) changed fuel filter 4) changed fuel...
See more
Top Bottom