Recent content by marvmerritt

Ok thanks. I thought the water could have been frozen in the hub because later in the day I moved the tractor and wheel rolled fine. But I’m thinking I’ll replace both and inspect for bearing or gear damage

L3830d The left front wheel locked up later in the day it unlocked while driving to house I noticed it leaking. I drained the oil it was milky I noticed the bottom seal Partly started off that is where it was leaking. Should I replace the upper seal also or just change oil and keep eye on it?

3830 starter won't engage I by passed the seat switch it run then It would run but due when I put it gear and let clutch out checked all fuses

To anyone who may have the same porblem in the future. It was the operator presense control module (opc).

Yes i hope it turs out to be the pto switch. while it was running good i engaged the pto and stood up and the motor shut off almost immedaitely. The opc is supposed to kill it in .7 to 1 second it seem to quick. i ran out of time to check it.

Hello all :). I've been scratching my head again trying to figure out whats going on. I've checked voltage and sensors. I messed with the pto lever changed it back and forth with the tractor not running then i started it and it ran good for a while then suddenly died like turning it off with...

Did you fix im having same problem i changed the solenoid and seat switch still have problem

Hello i have just joined. I have not been able to solve this problen my 3830 will start but will die in about 2 or 3 seconds i can turn switch off and back on and keep it running. i have changed the seat switch it was bad i have changed the solenoid stop. Im thinking about cutting the old...