Recent content by martinlaurentide

I ended up adjusting the 2 11 mm nuts on the top left and then loosened the 10 mm so I could use a slotted screwdriver 🪛 to adjust that. Not sure if I got it or not but ran the machine and it seemed good enough. Can't tell for sure.

2001...

Hi, I once let a Kubota dealer mechanic drop by when I had a problem reinstalling the injectors I'd removed and had rebuilt. Suffice to say he broke the part and had to send it out to be re- rebuilt. Longer story made shorter, when he returned to install, the speed setting of the top end was...

I bought a 2750d new and for 10 years have run it on my 2001 bx2200. It is barely robust enough for my application but I just repair as I go etc. Is the 2781a better? Stronger, thicker steel, no chain to stretch, and will it slide onto the same mounting system? There's one for sale near me and I...

I cleaned it up before opening anything. For your information, when you have an oil leak, things get dirty.

SOLVED: tightened bolt behind HST unit, was unsure of size of key, but it was pretty much unreachable by any Allen Key even cut to fit, so tightened by plyers, with a bunch of Locktite blue... started up the machine and it did not leak. There is a mm of space behind the bolt on the other side of...

I have removed the 4 bolts and loosened the unit. Transmission has to be removed to pull it, it turns out. There are cross members up high and below that restrict movement. Real pain. Was not aware. Woods Backhoe is on,... real p.i.t.a... I guess you had your transmission out for that. cheers...

I will bring the entire unit to the dealer for them to change all the o-rings and what suspect is the middle gasket that leaks. It's mostly disconnected and I found the 2 top of 4 bolts that hold it in place, loose and one behind which appears to be an Allen key head so loose that it's almost...

Thanks. See below. Changing the gasket but I would save that for someone in need... it could happen. Am hoping I won't need it. Will know soon enough. Cheers!

... so I texted that last 13 second video of the leakage to a very empathetic Kubota scrapper husband and wife team in Saskatchewan who said within seconds that it is most likely the gasket and if I am changing it to get the seals as they might be damaged when I pull that section off. He...

Just wondering how this turned out.

If that casing is not sold and fits a 2001 BX2200, I might need it. Everything works on mine but it's pouring oil from the top. I can't see precisely from where but the housing must be cracked... looking for a used one but per this post / threads and my research, they are expensive new and tough...

I had the neighbours depress the seat by-pass button, turn the key and with 2 more lights... a better video... It looks like the housing cracked. I will open the plugs with the Allen key if I can but can't imagine it's an o-ring causing that let alone 2 simultaneously. I need to determine if in...

Thank you. I did not see this until last night and believe you are correct. Having trouble with edits and can't delete posts or edit easily from my phone which I use from the garage.

Just saw this.. Thank you. So it's unlikely the o-rings beneath the Allen head plugs then. I will check with the Kubota tech and get an estimate to replace that because I suspect changing that might be beyond what I should try and do... it was my deepest gut feeling. Just wondering how that...