Lost_Jeep's latest activity
-
LLost_Jeep replied to the thread L2550 3 point hitch won't lift any weight.I finally got to taking the 3PH apart and getting into the valve. I found a little rust/gunk in the unload valve, and the poppet seemed...
-
-
LLost_Jeep replied to the thread L2550 3 point hitch won't lift any weight.I haven't gotten to checking the hydraulic pressure at the rear yet. We had a decent snow, so I was using the tractor to clear the...
-
LLost_Jeep reacted to North Idaho Wolfman's post in the thread L2550 3 point hitch won't lift any weight with
Like.
It's just a cover. You can test pressures at either of these (green) ports. -
LLost_Jeep replied to the thread L2550 3 point hitch won't lift any weight.The 3pt safety valve is near the lowering speed adjuster knob under the seat.
-
LLost_Jeep replied to the thread L2550 3 point hitch won't lift any weight.I've been looking over the Manual and looking at the tractor. I'm still unsure of a good way to check the hydraulic pressure at the back...
-
-
LLost_Jeep replied to the thread L2550 3 point hitch won't lift any weight.Per the image below, it looks the port on the front is a Tank port.
-
-
LLost_Jeep replied to the thread L2550 3 point hitch won't lift any weight.The tractor does not have draft control. Is there a good place to check the pressure at the rear?
-
LLost_Jeep replied to the thread L2550 3 point hitch won't lift any weight.I finally got a gauge and the fittings together and had some time to look at the tractor again. I'm seeing 2200/2300 psi coming from the...
-
LLost_Jeep replied to the thread L2550 3 point hitch won't lift any weight.I played with the decent adjustment, its set toward the slower end, but not closed off. Having a gauge isn't a bad idea anyway (and I...
-
LLost_Jeep replied to the thread L2550 3 point hitch won't lift any weight.I ordered a hydraulic pressure gauge, going to be a few days before it gets here.
-
LLost_Jeep replied to the thread L2550 3 point hitch won't lift any weight.Despite the heavy layer of rust protection (oily grime), that's the selector I moved. When up (turned clockwise), the FEL doesn't work...
-
-
LLost_Jeep replied to the thread L2550 3 point hitch won't lift any weight.I meant the block outlet that feeds the hard line that goes back to the 3 point, but I can do the same thing with the Power Beyond line...
-
-
LLost_Jeep replied to the thread L2550 3 point hitch won't lift any weight.Loader is a Kubota BF400G, loader valve has 7 hoses, 3 connect to the block. Unfortunately, I don't have a suitable gauge to check the...
-
-
LLost_Jeep replied to the thread L2550 3 point hitch won't lift any weight.I don't have rear remotes, or anything additional tied to the hydraulics (beyond the FEL). I did check and adjust the feedback lever /...
-
LLost_Jeep replied to the thread L2550 3 point hitch won't lift any weight.It only has the 1 lever, so I'm assuming no draft control. I also played with the lowering speed knob, that does what it's supposed to...
