lakergrad's latest activity

  • L
    lakergrad replied to the thread Will Not Lift.
    I wanted to update in case it may help someone else with the same issue. It turned out to be the float detent that needed to be rebuilt...
  • L
    lakergrad replied to the thread Lift Issue - LA680.
    I wanted to update in case it may help someone else with the same issue. It turned out to be the float detent that needed to be rebuilt...
  • L
    lakergrad replied to the thread Lift Issue - LA680.
    Retaining clip at the end of the spool housing was completely deteriorated. I’ll continue taking apart,
    • IMG_1977.jpeg
    • IMG_1978.jpeg
  • L
    lakergrad replied to the thread Lift Issue - LA680.
    Verified the cable is not broken. When disconnected from the valve, the controls work fine and the cable expands/retracts normally...
    • IMG_1976.jpeg
    • IMG_1975.jpeg
    • IMG_1974.jpeg
  • L
    lakergrad replied to the thread Lift Issue - LA680.
  • L
    lakergrad posted the thread Lift Issue - LA680 in Service, Repair & Maintenance.
    I’m still troubleshooting the loss of lift on my LA680/L3600. I have full tilt capability, but no lift/lower. If I swap coupler banks, I...
Show older items
Top Bottom