Recent content by L2350 Excitor

I will have to get it to not start and give it a whirl

Ok - I replaced the fusable link now it’s a green wire and the tractor I’ve been driving for 8 years will not catch fire because of a 100 amp wire. The alternator was a DB electrical and I’m afraid it didn’t come with an instruction Manual - just said it was a compatible OEM with the L2350 DT...

I don’t think I will replace the fusable link because the wire in 1994 was light blue vice green. In any case it’s not the reason I’m not getting a powerful start from the battery right? Alternator is a dB electrical - compatible with my L2350 DT. I don’t know where the regulator is so I I’d...

I think that red wire was just electric taped to the main cable. When I started trying to diagnose why my battery doesn’t seem to get a full charge I saw The broken clamp - unwrapped rhe wire - saw the corroded headlight wires and I e been trying to figure what went where. What needs to be...

From the headlight switch orange and brown conductors power the left, right; high and low headlamps. Black conductors are for chassis I have high beams? Cool.

The side of the fusible link which does not go into the electrical harness - how is that connected The link looks exactly like the picture but blue wire - it is screwed to the same post as the starter.

You guys are great. This is my original cable when I bought the L2350. You are all correct the main cable goes to the starter, but a second red wire is screwed to that cable, that goes to a coupling with a blue wire 1 inch loop- then proceeds on as a red wire into the rest of the electrical...

I actually think most do understand that the radiator and whole tractor get hot. The whistle goes I’ve over done it - and frequently do. That said I want to know why the starter just clicks until it cools about 90 minutes. Is the starter hit and that affects the brushes? Is there a auto...

My positive battery cable post harness broke - it had an extra small red wired on it but I’ve not been able to back and figure out where that wire went or was supposed to go. I could not find a replacement so I just replaced with a single harness that just has the one large cable wire...