Recent content by kwanwon

You might get lucky and the casting might be cast steel which is easy to weld. It's hard to tell the difference but one of my three point lift arms on my Yanmar broke and the welder discovered it was cast steel while repairing it, had I known I could have easily welded it myself. Sent from my...

On my B26 the fixed lift rod is 17 1/4" c to c. Sent from my SAMSUNG-SM-G935A using Tapatalk

Good idea extending the outrigger. I had been over that spot 4 times with the rotary cutter with no problems. It is a 60" so slightly wider then the tires and lower center of gravity then the backhoe. I'm glad my tires are loaded or I would really have been in trouble. Sent from my...

I have looked everywhere for a Kubota product to remove the pucker mark I left in my seat today. I had the backhoe on my B26 and was backing up to dig out an old stump along my creek. My left rear tire sunk slightly in to the ground and the right rear slowly started to rise off the ground, I...

Maybe I should go on a diet. I went to my local dealer to ask questions about a private party tractor that I was committed to buying and they gave me a free Kubota hat. Maybe he thought I was "healthy" too. ***129300; jmf28, your a lucky man. Sent from my SAMSUNG-SM-G935A using Tapatalk

Steering brakes nearly impossible to use on my B26, many times I need to use them while using down pressure on the loader bucket back dragging. Hard to hook up to PTO shaft with slip collar, not too bad with push button style. The things I love about it would be way to much to list. Sent from...

Lopez69 That's nice! If my B26 looked like that I'd be afraid to knock the new off. Sent from my SAMSUNG-SM-G935A using Tapatalk

Next time you use the chain saw, use olive oil for chain lube. That might be where you went wrong. Sent from my SAMSUNG-SM-G935A using Tapatalk

Be carefull, sad day. http://www.kptv.com/story/35149258/washington-co-man-found-dead-under-tractor-no-foul-play-suspected Sent from my SAMSUNG-SM-G935A using Tapatalk

100 td, I'm sure it's "in the mail". ***128513; Sent from my SAMSUNG-SM-G935A using Tapatalk

I had the rear tires on my B26 loaded with Rim Guard today. Big difference with stability and traction, tires stay contacted to the harder ground under the wet layer so there is reduced wheel spin also the ride is even better due to reduced bouncing on my dirt road. Sent from my...

If you look at the breakdown that 100 td sent, part 190 has a pin that needs to be nested into the fork on the tractor. Sent from my SAMSUNG-SM-G935A using Tapatalk

It sounds like the pin on the rack is not in the u that controlls the throttle through the governer on the tractor. Open the access plate and make sure it's in place. If not you will need to lift the pump slightly to align the pin. Sent from my SAMSUNG-SM-G935A using Tapatalk

Chew, have you used steel slag before? I spent 40 years in the steel industry and used it on my driveway years ago.

Yes it is, I only had a loader on one of my 4x4 Yanmars and a few atachments but I have operated several machines with backhoes and all sizes of excavators...but never a B26, it is impressive. All of the work I have done on this completely overgrown, uneven, wet 5 acres has been done by hand or...