Recent content by kubotaownersson

So I took off the backhoe and it appears there are four bolts holding the valve control in place. Looks like I have to remove that, and then as suggested, work my way into the blown hose.:eek:

Outrigger house developed a pin hole and is leaking fluid. For the life of me, I can't get this disconnected. Any tips or tricks. This is the hose on the right side of the tractor that runs from the right outrigger and then underneath to what looks like a series of valves on the backhoe...

Found a switch under the seat that was half plugged in. Bent is straight, cleaned the contacts and connected it and every thing works again. Sure is a sensitive switch though. Noted that on bumpy terrain, it cut the engine out, not fully but cuts in.

Hello there and thanks in advance for the help. I do the maintenance on my dad's BX 24. Just replaced the Solenoid / Stop switch that failed necessitating that we manually kill the engine at each shut down Good news is the key now kills the engine, bad news is that as soon as I put it in...