Recent content by KubotaDuluth

Mine shipped shortly after yours. Yellow Freight had it in their possession for two and a half weeks. Just picked it up last Friday in Duluth. I hope you are as happy with yours as I am with mine. I am thrilled with the build quality of the thing. Yeah it took a long time to get, but after...

One other thing to check is the 3rd function valve ground. The valve grounds to the tractor body via the mounting bolts, and as I found out, if you don't remove some of the paint from the mounting bracket, etc, it won't work. I installed the Landpride 3rd function myself on my L2501. Took my...

I added a LockNLube coupler to mine after I ripped a zerk fitting off my loader. Now with the Dewalt and the LockNLube, there is no excuse for not greasing. https://locknlube.com/collections/locknlube-grease-coupler/products/locknlube-grease-coupler (I have no affiliation with lock n lube...

Are you happy with the 60" width, or after having used it, would you have gone with the 72"? I have a L2501 and am debating between the 60 vs. 72.

No, I was happy with the cable as it was and no adjustment was needed. It was where the spec/procedure said it should be. The tractor still sounds exactly the same. But at least I can rule out the PTO grinding because it is trying to engage when it shouldn't be. Honestly, I think it is...

Thanks for the procedure! I'd say I'm right in the money. Starts to engage right as the lever meets the second (PTO on) notch. I can see how having that cable too tight would leave it half engaged/half disengaged and just grind. Thanks again!!

Interesting. I will do that. Thank you very much.

For what it's worth, my new L2501 (14 hours) makes the same noise. I didn't notice it until I started engaging the PTO, because with the HST I never had a reason to depress the clutch while it' running until then. Then like everyone else, the noise went away with the clutch depressed, and came...