Recent content by kskomro

I made the Mirrors with these two Items, plus JB weld for clamps to mirrors. I did have to grind a little from the mirror bracket, JB weld some, You will need to customize to your machine. Was not hard, just have to be inventive. They were not ready made to install. the 1/2" clamps could be a...

Works fine. My BX doesn't vibrate much.

I have a BX1880, I Currently have a Land Pride RB0548 It's to small. Barely beyond the rear wheels, when angled it doesn't clear rear wheels. I did have a RB1560 the heavy duty model and i thought it was very heavy for the tractor. I would say the best setup is RB0560, It's a little lighter, but...

I have the BX, I purchased the RB1560 with the machine. I felt it was very heavy. What i liked was that it extended plenty beyond the tractor. I traded it in quickly for the RB0548, Lighter and smaller. I'm not sure I'm real happy with the 48 either because It takes more to passes and a little...

I made these mirrors, super easy. Awesome option, makes a quick backup or look back easy. I purchased the mirrors on Amazon, filed down the plastic a little to fit the 1/2" clamps. When i'm not using them I fold them in to save space.

Piranha bar all the way. I've had 2 Machines, Piranha tooth bar on both. Excellent add-on. I take it off when not needed because it reduces bucket weight. Excellent for digging, stone, or ice. If I bought a another machine, I would install the Piranha bar.

Thanks for the Compliments! Didn't take that long, I took my time, little at a time during the fall.

So I made this home made Snow pusher to attach to the bucket of my BX1880. It comes on and off pretty easy in about 5 Min. I used 3/4 pressure treated plywood for most. 2x4's for sides and braces. 5/4 decking boards for bottom edge, and PVC cut on cutting edge. A couple of trips to Hardware...

Hey I like that Idea! I'm going to try that. I was going to also try the PVC on it. I'm currently in process of making a 5' wood snow pusher for the front of my bucket.

This past March I purchased my 2nd BX1880. I owned one about 5 years ago. I sold it and regretted it. So I ended up buying another. This time I ordered it with a 48" mower deck. I have never once said I wish i bought the 2300 series. I've done a lot of work with both of my 1800 series. The only...

There is no adjustment. But I took off my loader. Turned off the machine Then I took a Flat head punch, carefully I worked the center of valves on tractor side of quick coupler in and out fully and fluid came out. Then i disconnected and reconnected the loader several times no more leak. I...

My New BX1880 was delivered last month with a loader, and deck. No leaks. I removed the loader and put it back on. Ever since it leaked. I've removed it 6 plus times, still leaks. Sometimes worse then other times. The last time I removed it I took a flat punch and worked the Male Connectors on...

I have a new Kubota Bx and I'm thinking of getting of getting the older style Quick Attach, not the skid steer setup. At some point i'd like to take the bucket off and put on a set of Forks, and snow plow. The price is a little steep at just over $500, Plus the cost of attachment. Plus adds 50...

I put one on my BX1880, and love it. If you are doing any kind of digging it is a must. Makes it much easier on the machine. Why beat up your loader, when this cuts like butter. I take my off after i'm done with any digging. Makes the bucket lighter.

Contact them. They are real good !. Good Luck.