Recent content by KRT

Should be a removable screen in front of the radiator that pulls out from the top also.

I had a similar problem with my BX2230 and it was the fuel cutoff solenoid. Easy fix to replace.

I have a 2019 F250 Off Road Model. Tires were worn to a point of replacement and I did experience the ‘death wobble’ on bridge overpasses a few times. Tires replaced and the same overpasses are no issue. Just my results.

Just completed building a FEL last week for my BX. Thought some might enjoy a few pictures.

Mine has removable sides but was not a modification, the entire rear blade assembly was built from scratch. The sides have flanges formed around the back of the blade and bolt on with 4 carriage bolts. Flanges formed at the bottom of the sides to help the blade 'float'. There is a 1" round...

Skeets, I do not have a blower and just purchased the Kubota in June. My current intention is to utilize the rear blade for snow removal. The front weights were designed to match the ground clearance of the front axle. In the picture the rear blade is set up as my version of a box blade to...

Thank you volp. To answer your question, I work in a sheet metal shop so I have access to a lot of the technology for working metal including CNC turret presses, LASER's, press brakes, welding, powder coating, etc. When I need, or find an excuse to need something for the Kubota I try to design...

Here is my version.

Thanks bearbait. Lot's of unknown challenges when adopting and especially when trying to introduce into an established 'pack'. We have had to make many adjustments to eating and sleeping routines but the rewards far outweigh the challenges.

Here is a picture of our 5 Basset Hounds. We adopted 3 of them through the Ohio Basset Rescue organization. We are lucky they allow us to share their home with them!

Thank you for the compliments. With all of the talent on this site it's great to hear positive comments.

265 pounds plus a few pounds for the mounting bracket.

We fabbed up a 3 point receiver with extra receivers for future projects and then made a set of front weights (LASER cut from 1/4" steel) to help offset the rear load.

Working solo, rented trencher then used Kubota to run line and backfill 330' of trench with rear blade.

Our bassets hunt two times a day. Every morning they hunt down their food bowls in the bedroom and every evening they hunt down their food bowls in the bedroom. They are masters!;)