Recent content by Kestrel

Thanks. Its a brush hog. Set up by dealer. My neighbor thinks I may have cut too fast and the cuttings weren't clearing out of the middle quick enough. I usually cut in low gear. I did cut in medium gear this time as rain was coming. Live and learn!

I have a similar 3 pt hitch attachment though mine is triangular. Makes its really simple to hook up and adjust height having it move with hydraulics. Lots easier than hooking up the truck. Cost about $90. Some come with a small ball welded above 2 in receiver slot also

Thanks. We have hit a few rocks but haven't broken a shearpin. Rotary Cutter has about 12 hours on it.

I have a Land Pride RCR1260 rotary cutter that I use behind my B3030. Last cut I did was uneven with a higher ridge down the middle. Most likely a bent blade(s)?

Thanks 85hokie. Got home and looked at pto lever joints. Sprayed them with pt blaster. Moved lever back and forth a bunch. Started!

I installed a new Land Pride SB1064 on the rear PTO. Hooked it up and was running fine. I stood up and engine stalled. Now it won't turn over at all. Clicks. I greased HST foot rocker. Jump wired seat switch. Replaced OPC 5 amp fuse though old one seemed fine. Not sure PTO lever is disengaging...