Recent content by Kerry Road Orange

Took delivery on a Woodland Mills in late Nov. running it on the L3800. Have run 5” poplar and 5” pine through it. I burn hardwood that size in the shop stove. The quality of this machine is excellent and the design is well engineered. No regrets in buying this. Cleaned up lots of limbs before...

found the perfect bolt in the barn, Cut the threads off and used only the smooth shoulder - cleaned out the old weld and welded this one in. Tractor is all back together and working great again.

thanks for the schematic, it helped a lot. I just finished getting everything apart and found Kubota welds the linkage pins to the mount. The “B” post has sheared off. I am thinking of drilling then welded head and tac welding in some 8mm drill rod. Otherwise I would need a whole new bracket.

While running the front mount blower the joystick went limp! Pulled the seat and noted the joy stick cable for up and down is not connected? However; the welded in pin seems to be on the opposite side of the hole in the linkage? Almost looks like a part fell off? Any pictures or schematics would...