kcs 61's latest activity
-
KThe teeth have brazed carbide tips. There are different grades of brazed carbide, e.g C3, C5, C6. That is important in metal cutting...
-
Kkcs 61 replied to the thread Kubota hydraulic fluid fill.Not familiar with your machine, but on my B2650 it’s all one. The fill port in in the back I think most FEL run off the tractor hydraulic
-
Kkcs 61 reacted to ruger1980's post in the thread New owner of L175...smokes terribly bad... with
Like.
Blue can be excess oil bypassing the rings, or it could be unburnt fuel. White to grey can mean water/coolant or improper timing. Timing... -
Kkcs 61 reacted to BX2680MR's post in the thread who has the most hours on their Kubota BX? with Like.
A year ago when I bought my 2018 BX2680 it had 350 hrs on it. Now in just shy of a year its at 465
-
KI use my dif lock quite a bit. When there are times, I feel queasy about where I'm at, and think about those nasty "what ifs" I make...
-
KUpdate Found a blown 10amp fuse replaced it, Dash lights etc come on when key is turned like normal turn key to start nothing no clicks...
-
Kkcs 61 replied to the thread Engine oil interval.I put 50-80 hours a year on my tractor. I do an oil and filter change every year with a fuel filter change at the same time
-
KYou bought a $7,000 wheelbarrow and want to save the equivalent of a S*Bucks cup of burnt coffee? It's like some guys I race with. $10k...
-
Kkcs 61 replied to the thread Lynch pin instead of snap rings? - BX 3 Point Hitch.On my B2650 when I put the backhoe on I’ve got to take the 3PH off