Recent content by jrepp44

tempforce, are you able to use the tractor without hearing protection with the cruise control engaged? I can barely use mine even with noise canceling headphones.

The B3350 is the evil twin of the B2650. The B3350 is 33hp vs 26hp for the B2650. The B2650 does not have the DPF (26hp and under being exempt). The B3350 seems to have gained a bad reputation for the way Kubota implemented the emission controls.

Not all reviews are positive, but I have had good luck with this: http://www.amazon.com/Victor-Electronic-Rat-Trap-M240/dp/B000LNX06C/ref=sr_1_2?ie=UTF8&qid=1461954370&sr=8-2&keywords=victor+electronic+mouse+trap

wngnut, I have a B2650 HSTC with FEL and a 5' rear finish mower. I use it to mow and maintain 5 acres. Except for the loud hydro noise I really like this tractor. I got rid of my zero turn, I hated the dust and grass it thru all over me, and the exposure to the sun, and I really did not like...

I have a B2650 with cab. The hydro noise is almost unbearable, especially when using the cruise control. I changed the hydro fluid to Super UDT2, it did not help the noise. Noise cancelling headphones help a lot.

When you are having this issue does the engine crank? If not, then look at the heavy cables coming from the battery. On one of the cables there is a connector that can be unplugged. Unplug it and look inside for dirt or corrosion. Also there is a fuse box in the same area with some large...

I refill my B2650 when the fuel gauge gets down to two bars. It's been my experience that tractor fuel gauges are highly unreliable, so I don't take any chances on running out of fuel.

forceten - did changing to UDT2 help with the hydro whine?

I agree with coachgeo - a land plane is my tool of choice for maintaining my dirt roads (I guess it would also work on gravel). I never got the hang of a box blade, always had the peaks and valleys.

I just woke up one morning and no longer felt like holding a 5 gallon fuel can while it emptied. So I purchased one of these, couldn't be happier. Its just a tad slow but all you have to do is look at it while it does the work...

What implement(s) are you using? I recently replaced the medium lift blades on my rear finish mower with high lift blades and my B2650 started running hotter than usual - changed back to medium lift blades and all is Ok. Maybe you don't have enough PTO HP for the implement you are using?

Rich, I don't know if your membership question was directed at me, I am a new member also, but I will try to answer your question - if I am wrong maybe a moderator will chime in. 1) While logged on - open the "Quick Links" drop down. 2) Select "Edit your details" from the drop down list. 3) When...

There are several good videos on youtube showing how to install and remove the FEL, they make it look easy, I also have never been brave enough to take mine off. I will try it when I have a nice level concrete pad built!