Recent content by Johnny11

Thanks Bruce for the safety reminder. I'll take another look at the micro switches, I did see one (from the top anyway) for the PTO. This fix is wayy better than tapping that battery post,,, I've seen one (car battery) explode, from inside the car, thankfully. The G6200 is up in the shed...

Well anyway,,,, I just added a jumper from the ST (switch) down to solenoid. It's all good now. Thanks fellas!

Still Looking,,,, this may be the part I need...

Thanks Russell, I've been google-ing and found this: The plug is different https://www.discountstarterandalternator.com/p/new-alternator-regulator-kit-fits-kubota-g6200h-t1600h-bx1500d-bx1800d-tractor/

The switch didn't help, and ready to try another replacement part. Can anyone tell me what this is? [the GlowPlug indicator doesn't work either] Thanks!

Parts are slow to get here lately. But the switch came and installed that today. No change at all, which wasn't totally unexpected. I'll try running a jumper from "st" on the switch down to the starter. (Black/white wire)

This will be a nice OTA upgrade, we've been using 720p/1080i for a long time now: There are currently only a few more select stations in the US announcing that there will be new ATSC 3.0 technology that will be transmitted with 1080p Broadcast television. All other major broadcast networks use...

Just posted the link, but here's the description. [2020 Version] GE Attic Mount TV Antenna, Long Range Indoor Directional Antenna, Supports 4K 1080P Digital HDTV VHF UHF, Mounting Pole Included, Out of Sight Compact Design Probably should check out some youtube for some installation tips...

This thread motivated to pull the Verizon STB's and cancel Fiso TV. I think it the picture quality was declining anyway. [mini Fire-Stick runs circles all that clunky hardware] But the good news is saving $100 per month, and still have high-speed internet. When I called Verizon it was...

Thanks Whitetiger, It might come to that,,, pulling the white ring off. Ordered the switch today, lightweight compared to all the other massive parts on the machine. btw, Electrical schematic was easy to find: G3200 to G6200H operators manual.pdf - Kubotabooks.com

Well there are trade offs, I live between crazy lady and people that leave junk in the front yard; shower doors, etc. There is satellite internet, HughesNet, Viasat Worthy of a trial period...

Yes so close to removing it, I just need to remove that ring, it will pull away and I can swap it out easily.

Bruce, Thanks, I'm digging into this a bit more. I see you have the G5200, I think they are mostly the same. Popped off a cover and removed the battery to access the wiring. It appears the key-switch is in the center of the these two low voltage problems: the glow plug...

Thank you both for the replies. I did find two after market stater switches: Advance Auto (5 bucks) and a heavy 50 amp on Ebay (6 bucks). But that said another clue, when tuning the key in either direction there is a buzzing like a relay is not working. The glow plug indicator is not at full...

I'm wrong again, low power at the black/yellow. This is a 12v headlamp, it just glows a bit with the key turned. Also, jumped the the solenoid + to the smaller terminal, it cranks right over.