Recent content by john11139

I think they made the B3030 from 2006 to 2012. Were there any changes made? Or are they all the same? I have a earlier model but have a chance to buy a later model (2011). It has a belly mower which I have no use for. What other Kubotas will it fit and what is the demand for a used one and...

I put a pressure gauge on I, 1,800 psi. Tore cylinder off, seal is blowed. Will order parts soon. Thanks for the help

As long as it is not the steering controller. I plan on tearing into it this week end. I was under the impression that it had two pumps. One for the hst and another one that controlled the power steering and pto clutch. Am I wrong. Thanks for both responses and the link to the manual.

Just bought a B3030 with steering problems. No steer at all, unless you raise the front end with loader. 480 hours. I am trying to determine if it is in the steering controller or pump. $1000. Which pump provides pressure to the controller and if pump was bad, what else on that pump circuit...

I have a Kubota B3030 and I guess they are all the same, (deluxe) except you can get the cold weather and rear wiper package but I am looking at a B3000 and I guess they made a model B3000 HSD. It doesn't have the adjustable lift arms, and does not come with the front over head cab lights, nor...

How can you tell what year the B3030 series are?

My throttle is too stiff, how do I get the dash apart to adjust it? I have a manual but cant fine anything on it. Had a L3400 with the same problem, just looked up under the dash and loosened the nut a little.

Thanks for responding, appreciate it.

Do any of you have a B3030 with a factory cab on it? Do you have plenty of room getting in and out of it. Or do you have to twist around like a pretzel. I have had a blue tractor for years (actually 3 of them) and no complaints. But as we get older we look for the more comfort things in...

That's what I figured. Thanks

I am trying to replace the dipper stick end bushing on my backhoe. I made a special bushing driver to knock it out but it wont budge. Did they install these with locktite? Will it have to be cut our with a torch. Thought I would ask first. Maybe some one has done it before.

Give me a price and send a picture if possible and I will try and find out what shipping would be.

Thanks fellows for the information. Now I will tell you what I was really getting at. I purchased a L3400 with loader, backhoe, and a heated Curtis cab. The tractor has 1200 hrs on it. Its life was mainly snow clearing. Backhoe doesn't appear to have been used much. Needs a lot of small...

The one I am looking at is a B3000HSDCC. Wondering if the loader and backhoe would fit on it. I didn't figure the HSFCC would matter. So I just said B3000. Backhoe model BH75 Loader LA463 off of a L3400.

Back hoe model BH75 Tractor L3400 Serial # 57733