Recent content by Joe Hollas

If your M9000 only clicks, won’t turn over,this is the problem. Starter relay located at front of tractor on the left. After bypassing both safety circuits and replacing all the relays under the dash, this was it. It would be nice if the parts manual listed ALL the relays in 1 section. Spent...

Where is the #8 dioed located? I saw it listed in the diagram but did not find it on the diagram. Thanks for diagram. Since I first posted this problem, I have replace 3 more relays behind the dash, located on the right side. Still no change. I found a relay at the front of the tractor by the...

M9000, S/N 10692 2001 model. Ran fine then one am would not turn over only clicks from fuel solenoid. I replaced fuel solenoid Replaced all 3 relays behind dash. All 3 red fuses up front are ok Big fuse up front ok. Got power to key switch and goin out Bypasses neutral saftey switch pto switch...

How hard was it to get to the oil pump? I got the same problem Does the crank pulley have to come off? Any special tools?

My M9000,s/n 10692 with 2280hrs has the oil light coming on and then engine dies. This is what I have done so far: Removed oil pressure relief valve and spring made sure it wasnt sticking, lightly sanded outside of valve. Thought this fixed it as we drove it approx 2 miles and light stayed off...

With the battery out of the way, there is plenty of room for a 14x15 condenser. I angled it back and used zip ties and rubber hose cut and placed on any edges that rubbed on anything. I cant take credit for this, I saw it on forums on web, just applied it to a tractor. The fan motor doesn't...

Bought a M900 new, from day one ac was poor. Cool at best and not much of that. I use this tractor for baleing and spraying, it is well taken care of, doesn't sit outside unless necessary in field, oil changed every 100 hrs etc.These are the things I did along the way until I finally fixed the...