Recent content by jjwittmeyer

Can anyone tell me the torque values for the injectors and the barrels on the injector pump on a Kubota d1105 engine?

I'm getting the injectors tested tomorrow and I'm going to try it with the original zexel pump, to see if any changes. I'm guessing the new Chinese IP is wrong. I'll let y'all know.

Thanks for your help. Love Kubota. We have a 2 seat, a 4 seat rtv and on our third tractor.

Brand new IP. Existing shim was used. With the throttle plate removed, I could physically see the fuel rack pin in the cradle it sits in and verified it was working correctly. I don't know much about the new pump. Not a zexel. I would have used the old pump, but one of the pins the fuel delivery...

I haven't. Maybe assuming too much, but it ran great before the rack stuck in the fuel off position.

This happened the first time. The spring couldn't open the fuel. I took the throttle plate off. I know it is the right place.

Yes.

Hey gang. Having issues with my 2013 rtv with a d1105 Kubota diesel. First, it would not start. No fuel out of the pump. Watched several videos, then pulled the pump. Fuel shut of stuck in the off/forward position. Fixed. Couldn't get it to prime, so I replaced the lift pump. Still nothing, but...