Recent content by jdmcb

I tried it today and after a while it started moving. Is it possible there is air in the system? If I run the RPMS up on the tractor, it will function properly, but at a slower rate in that direction.

Thanks Dan, I give that a try. I've had the tractor for 2 years and never hooked up anything to that remote.

Sorry for the confusion. Both the chute rotation and tilt work on the double acting valve when I connect t the hoses for that function to that remote. They both only work in one direction with the double acting valve with float. The control lever for the float valve works when I move it forward...

I have a 2017 L6060HSTC with dual rear remotes. The manual says one is a "Double acting valve and the other is a Double acting valve with float position. I have a three-point Land pride snowblower that had hydraulic chute rotation option. It worked fine on the one remote. I added hydraulic chute...

Do you guys recommend using pipe dope on NPT threads. And how tight should I torque it. I have a Quick disconnect for a snow blower that needs to connect to a coupler. Also, the other connection is a o-ring boss. Im pretty sure I should NOT use dope on that one, but its stamped CHINA on the side...

Sorry for the confusion. I bought the tractor and blowers used. I believe the blower chute rotation hose is a 1/2 (O-Ring Boss). So if I'm correct, I need to find a 1/2 O-ring boss female to 1/2 (NPTF) coupler. And a 1/2 ISO 5675 Ag Quick Disconnects with the flat tip (poppet) ISO 7241-1 A or...

I have dual remotes on the rear of a 2017 L6060. I bought a land pride rear mount snow blower and added a factor chute rotator kit. Can someone tell me which disconnects I need to hook up to the rear remotes.

Any one ever order parts through German-Blis. Any advantages or disadvantages? I need a part for a Landpride snowblower. Thanks

Ok guys, I need expert advice. I have a western pro plow that I would like to convert to use on the loader of my L6060. I have dual remotes in the back and need to know how to properly set this up. I plan on using a Titan 3 point hitch adaptor plate and I want to add a crossover relief valve...

9204RD2 PTO-Driven 17’ Turf Batwing Mower. Not sure if the info is correct. I could be a 15 foot.

Will a L6060 handle a woods 17 foot Batwing finish mower. It says 40 horse min but its turning 9 blades. Will only use on a field with shorted grass. Thanks

Im interested. How many hydraulic lines does it require? How wide is it when in the V position? Thanks

I have my L6060 parked in our pole barn and occasionally have to move it out of the way to get to something else.(I know, should of built a bigger barn). My question is with the turbo, the manual says to let it idle for 3 to 6 minuets before shutting it down. I only need to run it for a minuet...

There is a used 60" Kubota rear 3 point snow blower for sale a was wondering if I would work OK on a L6060HSTC which is 69" wide. I realize it wont clear the tire path, but it priced right and Im not sure I want to spend $4000 on a new one. Thanks

Has anyone had any experience with Everest Snowblowers. I can pick up a 72 inch with hyd. rotation chute for 3600.00 +tax. Wondering how it would compare to landpride. Thanks