Recent content by jaymoney2

  1. jaymoney2

    Stand for parking FEL while raised.

    maybe make the stand wider and park the quad in the other direction? That might get you some extra space
  2. jaymoney2

    Stand for parking FEL while raised.

    the real solution is another barn / shed / garage… but then we can’t afford the stuff to park in the new structure!
  3. jaymoney2

    Stand for parking FEL while raised.

    Seems like an elegant solution, but something inside my head keeps telling me it would be nice to get at least some of the weight off the front end / tires when parked.
  4. jaymoney2

    Stand for parking FEL while raised.

    My garage isn’t very deep… apparently people only park a car in them, and would never want storage, a work bench, some space to walk in front of / work on a vehicle in the garage as well! now that the winter is upon us, the car, kubota, and snow thrower are all in the garage, and it is a bit...
  5. jaymoney2

    Loud chrip from the front end when moving, goes away with 4wd engaged- B2620

    no luck getting a good recording of the sound, but I was able to get under the tractor without the parking brake on, and rock it back and forth (just the play within the drivetrain) and it actually sounds like it’s coming from the bend in the front drive shaft. It has a plastic housing around...
  6. jaymoney2

    Loud chrip from the front end when moving, goes away with 4wd engaged- B2620

    There is fresh gear oil in there now, it was low when I bought it (with 450 hours on it) and noticed the chirp before replacing the oil. Now having a leak, so planning a seal change. with that being said, it is possible that it was run low on gear oil, especially on the top end where the...
  7. jaymoney2

    Loud chrip from the front end when moving, goes away with 4wd engaged- B2620

    Hello! Trying to diagnose a loud chirping noise from the front end of my B2620. I only hear it when driving in 2wd. As soon as I engage 4wd and start driving again, the sound goes away. Was thinking a bearing may be going somewhere along the front drive train, and the added pressures/...