Recent content by Jay E

That would make sense, although it doesnt creep or anything. IS the pump internal or is there a hose I can diosconnect to remove all the systems at the pump? What is WSM, some kind of service manual?

Rather than get into a bunch of fitting and gauges, I just unhooked the hydraulic fluid at the pump outlet and ran a hose right back to the tank. Unfortunately it simply showed there was no hydraulic back pressure and yet the engine was still dragged down somewhere. So the drag on the engine...

Thanks for replying. The entire system was bypassed and it made no difference, so it is not that. Yes the power steering is normal. I donty know what GST is. I'm going to put a flowmeter inline right after the hydraulic outlet and see what the running pressure (and flow) is. Hopefully it...

Thanks for the post. I read the post and think he is talking about the backhoe/threepoint lever. Mine moves just fine, although nothing different happens when it is moved to either position. What is supposed to happen? Could this be an indicator of a problem. It is a booger to get to, a lot...

It is plugged in. As a reference it it drops around 250 RPM at an idle with it unplugged and this is about the same amount it is idling low from normal. So that is what makes me think it is hydraulic. All the filters are OEM. Also since it is a suction filter system I dont think a clog would...

Hello, new to this forum. Have an L35, use it for work around the ranch. Recently did a complete fluid change everything worked ok. Around 15 hours later the idle was suddenly very low, there is now a constant hydraulic load on the engine. I need to use the throttle lever advanced just to...