jaxs's latest activity

  • J
    jaxs replied to the thread Steel T-Posts.
    You've already heard about oil and quality bits so I'll just add that the slower the better. Apply as much pressure as you can while...
  • J
    If I felt grit in motor oil I would figure something had went horribly wrong and might be too late to save engine. One thing is...
  • J
    jaxs replied to the thread Stinkin cart tires..
    Idk what the problem is but you do have an unusual one. IMO it doesn't matter whether tires are on carts or dismounted and stacked...
  • J
    jaxs replied to the thread Rear blades for tractor.
    IMO 7 foot can easily overburden drivetrain of 45 horse tractor but I'm of the opinion many Kubota owners use implements that are too...
  • J
    Avoid overloading and overrevving along with proper maintenance should give you many trouble free hours. 100 hours of use is 100 hours...
  • J
    jaxs replied to the thread Just a paint question.
    Is this different to people paying more for 100 year old barn wood than going price for premium cabinet lumber? Or how bout gals paying...
  • J
    jaxs replied to the thread Stinkin cart tires..
    I've not had this problem with tubes but most times when SMALL tubeless tires leak down I find bead leaking. Break both beads, coat...
  • J
    jaxs replied to the thread Just a paint question.
    Look at color pictures in China and you will notice 75% of things is black,white or grey.
  • J
    jaxs replied to the thread what paint code do you use?.
    To mix a match, start with 1 gallon each of safety Red,Yellow and Blue plus 1 quart of black and 1 white.
  • J
    Could be something minor, something major or might even be a combination of things. It's near impossible to tell by looking and twice...
  • J
    jaxs replied to the thread Maybe this year?.
    From the standpoint of material and labor, it's easier and effective to install a hot wire 3-4' from net fence than going higher than...
  • J
    jaxs replied to the thread Loader.
    With only 15-20 hp difference the 4310 should handle it fine but you will likely need different mounting hardware. Just be sure you...
  • J
    jaxs replied to the thread Flower planter.
    That looks just like fence corner post anchors we use and it takes a man on each end of a bar to screw them into ground.
  • J
    I only cut enough wood for a fire pit and a smoker which is split at the stump. Since I don;t cut much I borrow splitter from a bbq...
  • J
    jaxs replied to the thread BX-tractor shift fork failure.
    You should go to dealer and examine roll pin 80. If pin is broken, show manager the pin then INSIST he put what he saw (broken pin) in...