JasonW's latest activity
-
JJasonW replied to the thread Making improvements to my new Kaufman 30ft gooseneck trailer.I was going to recommend peerless binders with the folding handles, but looking closer at your pictures it looks like you already have...
-
JJasonW replied to the thread Does anyone recognize this tube that comes out from under the seat?.I believe it’s the vent tube from the top of the transmission. I’ll have to look at my M after I get off from work. The end looks...
-
-
JJasonW replied to the thread Kubota MX 4900 DPF delete kit.All of my Kubota’s have been pre emissions. When I was looking for a M6060 or M7060 found a deal on a M6040 I couldn’t pass up. For my...
-
JJasonW replied to the thread L3010 float mode ?.The position control adjustment knob is located below your 3pt lever in the picture you posted earlier. It just limits how far down the...
-
JJasonW replied to the thread L3901 - overheating after extended, heavy duty brush hogging.Finally got it to upload. This was after cutting about 45 minutes. The temperature gauge was just above normal for my tractor. No where...
-
-
JJasonW replied to the thread L3901 - overheating after extended, heavy duty brush hogging.Dry. In my other post I have added an aluminum window screen on top of the factory screen. Have to clean it more often but nothing gets...
-
JJasonW replied to the thread L3901 - overheating after extended, heavy duty brush hogging.Not saying it will fix the overheating but it’s definitely putting more load than necessary on the tractor. The bushhog blades should...
-
JJasonW replied to the thread L3901 - overheating after extended, heavy duty brush hogging.How hot is it getting? Temperature reading? Gauge halfway, 3/4 of the way up? Good chance your radiator has debris in the fins blocking...
-
JJasonW replied to the thread Fan installed backward.Yes looking closer at the blades it appears to be backwards.
-
JJasonW replied to the thread L3410 4WD not working.Might be easier to drop the entire front axle. I did that to my M series when I installed a locker in the differential. Have to...
-
JJasonW replied to the thread Fan installed backward.No experience with this mower but which direction does the fan rotate? If it is backwards you should be able to get to it by removing...
-
JJasonW replied to the thread So if no one knows, who does ? As recommended posted video.Both have the same 4 speed transmission with park?
-
JJasonW replied to the thread So if no one knows, who does ? As recommended posted video.I guess I’ll be the first to ask. Why are you putting the shuttle in forward or reverse with the gear shifter in park? I read that in...
-
JJasonW replied to the thread Possible ZD331 or ZD323 Purchase.I bought a ZD331 60” deck a few years ago. Had a little over 1k hours on it when I bought it. It does shake quite a bit at idle. So...
