JasonW's latest activity
-
JJasonW replied to the thread M7060 mystery vibration.Does this happen on pavement, dirt or both? You say it happens at all speeds but does it change frequency with ground speed? Does it do...
-
JJasonW replied to the thread Trailer Advice.What’s your tow vehicle? Any other uses other than hauling the tractor? I used a 18’ 7k trailer with my L3800(same dimensions as a...
-
JJasonW replied to the thread ZD326 Frozen Scalp Wheel Shaft Troubles.Bottom line is you bought an abused machine because of the price and it seems like you’re constantly complaining about fixing things on...
-
JJasonW replied to the thread 4x4 golf carts / electric UTV?.Several years ago at my work we ran the Polaris Ranger EV’s. The old design not the new kinetic model. Same 4wd...
-
JJasonW replied to the thread Will an L3560 w/ BH77 fit in my garage without drama?.How about for the majority of your work, rent a skid steer for the main dirt moving and clearing. Then find a machine that will fit your...
-
JJasonW replied to the thread Found : 7x16 car Hauler.Definitely go through the brakes/bearings if you don’t know the current condition of them. Brakes on one axle or both axles? Do the...
-
JJasonW replied to the thread Remove hood latch cable.Parts diagram shows a E-clip. Clean it up with a wire brush. Looking closer it looks visible already.
-
JJasonW replied to the thread How do you clean your greasy loader pivots?.Should have added in my first post, I also use the Lock-N-Lube brand grease fitting caps. Makes greasing faster as I don’t have to wipe...
-
JJasonW replied to the thread How do you clean your greasy loader pivots?.I definitely don’t clean mine like some do here, but what I do is when I grease it I wear nitrile gloves and just gather the excess/oil...
-
JJasonW replied to the thread Dewalt 20v 3/4 impact.Make me an offer. Used one time to remove the blades on my bush hog
-
JJasonW replied to the thread safety on a hill going straight up and down.Keep the bucket low. Keep it in 4wd and use a low gear. Don’t try to shift gears or push the clutch in while on the hill. Brakes...
-
JJasonW replied to the thread 12V outlet for ROPS M7060HD?.I have an open station M6040. I installed an auxiliary fuse block ran to the battery under the dash tied to a relay so it’s only powered...
-
JJasonW replied to the thread L4701DT Driving Advice.Keep the clutch pedal adjusted according to the manual. Don’t ride with your foot on the pedal. Just be cautious of your foot riding the...
-
JJasonW replied to the thread Kubota L47 TLB 50 Hr Service.Which filter? Looking at the parts diagram the hydraulic filter HHTA0-37710 includes the magnet. But can also be bought separately. (For...
-
JJasonW replied to the thread Kubota Advice: Buy and Fix up L5030HST, or Get Newer TYM?.Based on your recent ZD purchase and working on it, only you can decide you want do to. Spend a little more and not have to work/restore...