JasonW's latest activity
-
JJasonW replied to the thread M7040 shuttle problem.I will add you can remove the fuel tank without removing the tire. Even though the instructions state to remote the tire to drop the...
-
JFauquier county VA. Asking $37,000. Well maintained, garage kept long box Super Duty. 98,500 miles. Emissions on. Needs nothing at all...
-
JJasonW replied to the thread Looking for Weight Rack and Suitcase Weights.Also look at Tractorweights.com. What machine M7060? Do you have filled tires? Wheel weights not an option?
-
JJasonW replied to the thread Published weight.I hauled a L3800 with a FEL and implement for 10 years on a 18’ 7k lb trailer. I believe the trailer weighed 2100lbs. I now have...
-
JJasonW replied to the thread Stabilizer on my L4802.Not all tractors have the stabilizers on the outside of the lift arms. Your tractor must be brand new or you have never used the pin...
-
JJasonW replied to the thread Mx5400 Gear Drive won’t shirt.I took this picture last year on a L series at the dealer to fab something similar to my MX.
-
-
JJasonW replied to the thread Mx5400 Gear Drive won’t shirt.Sitting for 3 weeks is pretty quick. I’ve let my MX sit longer than that without issue. I’m sure that varies with climate. My MX...
-
JJasonW replied to the thread kubota 4802 DT tractor.Look at Tractorweights.com. If your rims have mounting holes they can accept wheel weights. Just have to measure the bolt pattern and...
-
JJasonW replied to the thread ZD1511 not achieving full deck RPMs.Does it have a tachometer? That model has an ECU correct? Have you talked with your tuner?
-
JJasonW replied to the thread Stabilizer on my L4802.This pins do not have to be in the same spot on each side. As long as your implement is centered you are good to go. If they are hard...
-
JJasonW replied to the thread New L3902 - 17h - Lost all hydraulics.What does “level seems ok” mean? Is the level in the correct range on the dipstick? How are you determining pressure?
-
JJasonW replied to the thread Replacement parts.Either Messicks or Coleman’s online for parts. But it wouldn’t hurt to get prices from your local dealer. Especially larger items like...
-
JJasonW replied to the thread Dipping toes in the world of Welding.Read up on the different processes and then decide which would be best for you. 110v units or 220v units. They have multi process...
-
JJasonW replied to the thread Recommended brush hog for L3010?.For the prices you have listed and the amount of use it would get I would recommend looking for a used 5’ bush hog with a shear pin. Way...
-
JJasonW replied to the thread Up a creek.Id like to point out the clutch adjustment is considered maintenance.
