InTheWoods's latest activity
-
IInTheWoods replied to the thread Wifi "farm" extenders/MESH.The CPE210 can be configured as a general access point. In that configuration, it will allow any Wi-Fi device (phone, camera...
-
-
Ihere's a third option... although I've never tried this one out.
-
IInTheWoods replied to the thread Wifi "farm" extenders/MESH.I think that one is obsolete, replaced by the CPE210 I mentioned above.
-
IInTheWoods replied to the thread Wifi "farm" extenders/MESH.I don't have any experience with the Arystone system. But, I've designed RF stuff professionally for >30 years and have some personal...
-
IInTheWoods replied to the thread D722 liner needed.Strange. What are the critical dimensions of the part you need? (ID, OD, length)
-
IShow 'em if you've got 'em or can find them. Anything tractor or farm or truck related. Kubota mostly, though. Or not. This one made...
-
IInTheWoods replied to the thread Teach me about hydraulic motors.So what do you think about using the tractor's hydraulics for this instead of a dedicated PTO-driven pump?
-
IInTheWoods replied to the thread Teach me about hydraulic motors.I know - just suggesting a pressure relief valve as a safety measure. I'd expect the pressure to be quite low normally, unless...
-
IInTheWoods replied to the thread Teach me about hydraulic motors.I'd be inclined to select a motor with enough displacement that it hits the desired RPMs with the full flow your pump can provide...
-
IInTheWoods replied to the thread Teach me about hydraulic motors.Assuming there's another remote, seems like it'd be worth considering.
-
IInTheWoods replied to the thread Teach me about hydraulic motors.It has the flow. Are other hydraulics being used at the same time as the trimmer? Yes. And similarly, the motor speed is directly...
-
-
IInTheWoods replied to the thread Teach me about hydraulic motors.With 7.4 gpm from that pump, you could exceed the max flow of that motor. With hydraulics, you don't just add a simple 'valve' to...
-
-
IConsider investing in a set of loader mounted forks. You can thank me later.
-
IInTheWoods reacted to mikester's post in the thread Another tractor accident… and a question with
Like.
...kept the loader high to keep the bendy bits off the ground while driving...what could go wrong?
