Recent content by Idaho Moose

I finally fixed the issue. I found that on the fuse holder assembly the 15amp fuse (controls solenoid) holder tested good but when I took it apart the little spring side of the wire contact was broken. It was still in place and would show 12v but when the solenoid would try to draw the required...

When I apply 12v directly to the solenoid it activates the shut off lever on the pump. It pulls it all the way back just like the manual shut off.

Yes the solenoid activates when I apply 12v directly to it.

I have a 2001 Kubota L4310 and cannot seem to get the shut for the fuel to work when you turn key off. I thought it was the delay timer because I could not get 12v out of it when the key was turned off. Replaced it now I get 12v for about 5-6 sec when you shut off the key. Thought it must be the...