icehorse's latest activity
-
Iicehorse replied to the thread Land Pride RCR 1860 - odd pin for top link ?.I think my weak, arthritic hands are a part of the problem. My approach has been similar, but in the end, I have to crawl underneath and...
-
Iicehorse reacted to Elliott in GA's post in the thread Land Pride RCR 1860 - odd pin for top link ? with
Like.
I have an RCR 1860 and a LP QH10. It probably took me 15 minutes to hook up the PTO the first time, but now I routinely seat the PTO... -
Iicehorse replied to the thread Land Pride RCR 1860 - odd pin for top link ?.Yes, when using my QH15, that's what I've been doing! But I want to try using the cutter without the QH15. Mainly because the QH15...
-
Iicehorse reacted to North Idaho Wolfman's post in the thread Land Pride RCR 1860 - odd pin for top link ? with Like.
Grade 5 is about the same if not stronger then the pins. With the Bushing it will be stronger.
-
Iicehorse replied to the thread Land Pride RCR 1860 - odd pin for top link ?.That's the plan. I do wonder how strong a grade 5 bolt is compared to a link pin? They'd be roughly the same diameter except the bolt...
-
Iicehorse posted the thread Land Pride RCR 1860 - odd pin for top link ? in Implements & Attachments.I've used my Land Pride rotary cutter only via my quick hitch. But it's a pain to hook up the PTO with the quick hitch in the way. So I...
-
-
ISuch an adapter does not exist, and you wouldn't want it if it did, as PTO adapters are are hard on the Tractor. You can get a...
-
Iicehorse reacted to North Idaho Wolfman's post in the thread Correct lengths for PTO shafts with Like.
DO NOT use PTO extenders they can damage bearing very easily. 4" min overlap on the PTO is fine.
-
Iicehorse replied to the thread PTO Overrun clutch?.aha! interesting! thanks! Ok, so I see I can buy a whole new shaft with a slip clutch or a shear pin. But it would be nice if I could...
-
Iicehorse replied to the thread PTO Overrun clutch?.I would agree that a tedder rake is less likely to come to a sudden, dead stop than other implements. But let's say it did...
-
II just got my new drum mower set up and working yesterday, hooray! But as I was doing this I had to cut down one of the provided...
-
II have an old, old hay tedder / rake. It works great, but as far as I can tell there is no slip clutch or shear pin. So I'm thinking...
-
Iicehorse replied to the thread Drum mower replacement blades question.I wonder if it has to do with breed or climate? The ones that I let graze will make "cow holes", shallow and wide. The rancher tells me...
-
Iicehorse replied to the thread Drum mower replacement blades question.Every year I let cows on the fields for a few weeks after haying. Cows dig, and our soil is quite rocky.
-
Iicehorse replied to the thread Drum mower replacement blades question.Sorry for the confusion. It is a brand new mower, at this point, the blades are fine. But once haying has begun, I'm on the clock. I...
