hudson68's latest activity

  • H
    hudson68 replied to the thread BX1860 will not start.
    I discovered that the solenoid operation on my particular machine is opposite from yours. However I would have never known this without...
  • H
    hudson68 replied to the thread BX1860 will not start.
    I’ve attempted every fix except letting the lift pump run for an extended period of time. I will try this and let everyone know the...
  • H
    hudson68 replied to the thread BX1860 will not start.
    This is the correct operation of my machine. There must be opposite set ups out there. Thank you.
  • H
    hudson68 replied to the thread BX1860 will not start.
    Your explanation of solenoid operation tells me a great deal. Mine seems to be working opposite. Even activation of the PTO safety...
  • H
    hudson68 replied to the thread BX1860 will not start.
    Is it apparent to bleed at each injector inlet nut individually or can/should be performed on all 3 concurrently? I loosen the inlet...
  • H
    hudson68 replied to the thread BX1860 will not start.
    I did not get any type of smoke at all.
  • H
    hudson68 replied to the thread BX1860 will not start.
    I bled it at the bleed nut with sufficient flow and each injector inlet nut individually. Nothing happened other than turning the key...
  • H
    I have a Kubota BX1860 that will not start nor is there any signs of combustion. I have performed the following to the fuel system...