Recent content by holmanjp

Thanks for the video. I actually was watching your video to compare yours to mine. The I found this post. Seams something is different with mine. The bushing stick out past the handle not allowing me to release the K Connect gears from blower. This is how my dealer delivered it. Pics of mine vs...

Yes, I believe this is same kit. If you have BX23s the frame is different. People have used it. I have pictures and description of the install in above post.

The hard lines can be used if you buy or have a $60 line bender.

Yes

At some point. My plan is to then add a Kubota 3rd function like I have on my FEL. The valve is electric it tapps into and is mounted right where the QC are mounted. It's T'd into the factory hard lines.

From what I have seen, with BX23s because of BH the frame is different. You can't add the valve without cutting part of the frame out. It can be done like you want, but frame needs to be cut.

Appearance, I like everything to look factory. Or close to it. It just bothers me seeing things hanging off the ROPS.

Thanks Dan, Like I said I no nothing about hydraulics. Is this the correct connections?

I know this is an older thread, but I'll post here to start. I know nothing about how hydraulics work. At some point I would like rear remotes. I would like to use the summit EVK4-K8 Electric Rear Remote Valve Kit for Kubota BX Series Tractors (Four Spool) I will only need or use it with BH...