Recent content by Hillbilly77

Installed my new seat today. (y)

You said that you’ve flushed the system 3 times and the oil is still milky. Let me ask a dumb question. Are you sure that you are removing every drain plug and draining the entire system? I’m not familiar with your B1550 but I know my L4310 has several drain plugs. If you aren’t getting...

A new seat is my next investment. I am shopping for one as we speak.

I mounted a set to the front brush guard. I had a thread on it a while back. https://www.orangetractortalks.com/forums/threads/new-work-lights-on-my-l4310.30097/

Yesterday I installed a new valve for my rear remotes to run my splitter and my wood chipper. Today I tried it out (and it works great!).

I used a simple piece of PVC. I bolted it to the fender with a couple carriage bolts. I also cut a couple notches in the bottom to help clean it out so dust and/or liquid doesn’t build up.

I reached a solution to my valve question. Per @Dave_eng ‘s advice, I removed the old valve and installed a Cross brand selector valve. I welded up a mount bracket and got the install finished up today. I found the valve on eBay for a good price. For the supply and return lines, I was able to...

Between my neighbor’s farm and mine, we use several of the Titan brand plates. We’ve found them to be great quality and we haven’t had any trouble at all. We have them on a bale spear, rock bucket, regular tractor bucket, and a snowplow and they’re all great. I also own a set of Titan brand...

Thanks again. I appreciate all of your help. I won’t need the existing valve so the installation of the new one should be simple and straightforward. Now to get my hands one.👍

Thank you. I truly appreciate your time. If you find out for sure it’s the one I want I’ll look into where I can buy one.

That sounds great. I can wait a few days. I’ve been messing with the bungee cord this long, so a few more days won’t hurt. I won’t be using either implement this week anyway. To answer your question about the flow control valve on the chipper - it was installed on there from the factory...

I was told to get a power beyond valve. From what information I found online, this looks like a conversion I’d need to do, or can I buy a valve already configured that way? Or would the 4 way, 3 position valve eliminate the need for power beyond? Or is it already considered power beyond? I’m...

@Dave_eng Here are the photos of the valves you asked for. SPLITTER: CHIPPER: VALVE BODY UNDER TRACTOR: The line on the left closest to the filter (with the 90° fitting) runs to the valve on the fender. LOADER VALVE: The leftmost line runs to the valve on the fender.

The new format dropped Tapatalk support for loading photos. Please bear with me as I try to figure out posting photos. In the mean time, yes, the existing valve has one line to the loader block and the other line goes to a valve body next to the hydraulic filter under the right side of the...

Thank you for your reply. I don’t know if either implement has a built-in relief valve. I have very little experience with hydraulics. How would I go about figuring that out? Is there a visual check I can perform? I don’t use the existing valve for any other functions besides supplying...