Recent content by haveissues

Update on the r14's in the snow-They make my 2620 with R4's look like it is on slicks. They are a huge improvement.

The 2620 never had a quick attach option for it but the quick attach for a newer tractor fit it. I think B2366 is the part number you want.

As Dave said, a mixer will be waaaaaayy faster than trying to mix it in your bucket. I'm sure you figured it out already but that slab is 110 bags of concrete.

Do you have one of those mix on site companies in your area? My friend just something that was 2 yards and it was cheaper to use the mobile mix guy than to buy 80lb bags at home depot plus a lot less work. edit-you can use it to mix but will likely end up with concrete on your tractor in my...

You can attach the hydraulics and move the arms to either extreme and they will line up but I'm not sure you can put the loader back on in that position and when you then try to move them together they will probably move at different speeds if that makes sense. If you disconnect the hoses to...

Thanks! There are quick connects for the loader, although I still have to make a bracket for them.

I wasn't thrilled with the placement of the third function valve on any of the kits-it just seems odd to me to have it slapped on the side of the loader plus all of the kits will need different hoses than the ones included if you have a backhoe so I decided to make a custom setup. I put the...

Drain or suck some out. I would not leave it an inch over the full mark. And find a new place to take your tractor.

I ordered my lx in July and it took about 3 weeks to be delivered to the dealer. Mine is a rops model.

Nonsense. Whoever is prepping these before paint just doesn't feel like covering up all the zerks and the dealers are not checking when they grease up the pins. My new LX had a few zerks painted over, all on the backhoe.

the rears are 15-19.5 and the fronts are 25x8.80-14

I made something like the DR link that I used along with a choker and it worked really well. IMO getting the front of that log up in the air will make it a lot safer and easier to skid.

So far so good but I got them for 2 reasons and have not tested either yet in either condition - hopefully to be a little easier on the lawn when it is damp out and better than r4s in the snow.

You will have to have someone with a cab measure then. The cab has a separate seat but the rops is supposed to have a swivel.

I can measure min this afternoon if you like but I suspect it will be the same or very close to the 2650. My rops lx has a swivel seat just like the 2650 above.