Recent content by haroldeveryman

I have info on bypassing the autoreturn feature if it is still needed.

I know the details. What is it you need to know?

Problem solved. From the number of replies I got to my problem I assume there are no other Kubota B20 owners with a bt650 or bt750 backhoe. Just in case someone in the future has a similar issue I will post the solution here: On the bottom of the control valve section that controls the boom up...

Did you try Messicks? Do you have a part number? What is it used for in your 750?

After finally conquering the swing problem, I now have another serious problem. I used the backhoe a few times this past summer and all was well. Saturday I took it out of the barn to dig a few holes and found it impossible to remove the safety boom-lock pin. Normally I just pull back on the...

I finally decided to implement the rheostat into the system. I purchased a heavy duty 5 ohm, 100-watt rheostat from Amazon and mounted it on top pf the Backhoe console. I can now vary the swing speed from full to a very slow crawl for precise positionong. Works like a charm. I'll post...

I have a 1990 Kubota B20 with a BT650AR backhoe. The AR stands for Auto Return, a nice feature which makes it possible to set the position of the swing on the backhoe and automatically return to the digging position after swinging to the side to dump the load. It is controlled by a "computer"...