Harold B's latest activity
-
HHarold B replied to the thread Hydraulic Failure.Evening update: Do not attempt to remove the cover plate in a vertical position such as in the tractor! Found everything! Started with...
-
HHarold B replied to the thread Hydraulic Failure.Haha, was my first thought! but… in a neutral location (between high and low) it is actually doable when a small sweet spot is found...
-
HEven for someone who could hunt bears with a switch would not be able to turn the HST input shaft by hand on a working unit. You have a...
-
HHarold B replied to the thread Hydraulic Failure.Here is the section where he thinks it’s sheared either above or below
-
-
HHarold B replied to the thread Hydraulic Failure.This view is of the front cover removed he suspect the shaft is sheared near that piston pump. Looks like that drum with springs and...
-
HHarold B replied to the thread Hydraulic Failure.The input shaft from the HST that the fan coupling attaches to and the engine driveshaft.
-
-
HHarold B replied to the thread Hydraulic Failure.Also reached out to Kubota as the tractor only has 250.3 hours on it.
-
HHarold B replied to the thread Hydraulic Failure.The manual has the whole transaxle out and turn up making the cover horizontal. Anyone ever tried to remove the cover vertical still in...
-
HHarold B replied to the thread Hydraulic Failure.So… after a long winded discussion with the senior tech at Siler Implement. He is convinced the input pump shaft is sheared at or very...
-
HYou changed the filter but did you clean the hydraulic screen??
-
HWell, that's not good! You should not be able to turn it easily by hand.
-
HThere's a WorkShop Manual available at KubotaBooks. The hydraulic diagram is shown below If you've lost travel, steer, loader, and...
-
HHarold B replied to the thread Hydraulic Failure.Morning update: all attachments are off, BH circuit quick connection bypass hose firmly in place, pulled lower suction screen, it’s...
-
HHarold B replied to the thread Hydraulic Failure.No complete hydraulic loss, I haven’t previously split one of the used filters open, but while changing them, since new, there has...
-
HHarold B replied to the thread Hydraulic Failure.I have a video can’t seem to post it, I’m kinda a big guy, but none the less it turns rather easily in both directions and makes a low...
