Recent content by halg

Many thanks to Dave_eng and Lugbolt. After following the instructions they provided I found the red wire had corroded and come loose in the 6 pin wire connector. Some solder and shrink wrap and it is back to charging. Great to have everything working again! This forum has been a big...

This is great info thanks!

Ah gotcha. Yeah no probes into the battery to check for levels or anything on my little b2910. Thanks for the idea tho.

Thanks for the reply Matt. I will check that out next. My fear is the culprit will end up being a wire some GD mouse snacked on. -hal

The workshop manual (WSM) for my B2910 has information on the step to remove my tank. Check out RCW's post and find the one for your tractor. It might give you at least an idea. I've found my WSM very useful so far. Good luck!

Thanks for the reply. Not that I have read in the manual. But, as I mentioned in my previous reply, I did replace the battery a few years ago with a plain sealed lead acid automotive battery from Sams. The previous one was an old school flooded with ports to check the water level and add...

Well don't I feel like the dumb a$$ wasting everyone's time. You are right. What a brain fart. Yep. 14 volts AC so its not the dynamo. It is obvious electric stuff is not my strong suite either! I just replaced the regulator so I would not think that is the cause. The wiring diagram...

Hello (again for those who have seen and replied to my other recent posts). The battery light has been on my '04 B2910 for 5 years or so and so I took it to my local dealer to fix that among a handful of other things. They came back with a price that told me they basically didn't want to work...

I assume by bled the lines you mean cracking where the lines attach at either the injector or pump so air can escape. If that is the case no. No one has done that. I did change the fuel filter quite a while ago but this tractor has a nice bleed location right at the filter. Something...

I agree wolfman. In fact. Here is after 20 minutes at 2500 rpm. I don't see any leak at all really. It sure appeared as quite the mess in that first picture. But, for now I am going to file this under not a problem and just check it periodically. On the the next problem which is the...

and a few more.

Ok here are the results. Perhaps they just do need cranked down. I don't see any leaks in the lines do you guys? Only idled for 5 minutes or so.

Great idea!

Great info thanks everyone. I'll have a closer look tomorrow and try to determine if there is a crack or not. I suspect there is one. It seems pretty unlikely to me that things got loose somehow and just tightening it will fix the problem. I'll inspect closer tomorrow and call around...

Hello. While flushing and changing radiator hoses, I saw this leak. From the accumulated dirt looks like its been going on a while. No issues from the tractor performance wise. It is not missing or anything. I've never messed with diesel injector lines before. None of my wrenches fit...