Recent content by Gruh6

OK, that makes sense. So if I weld the mounting plate to the FEL side ways and plumb the hoses it will finally work. I think I'll wait for the old one to fail. I bought a bunch of O rings for the fittings when I ordered them. Good thing too. There were 2 broken ones I guess from taking them...

As look back over the thread I see you had the correct valve picked out. I guess I don't know or understand. Is it a different valve body or just different guts.

I just looked over all the paperwork that Eric sent me and to tell you the truth I have no idea what the heck it all means. I tried to find the LV22TKRFA3BW on line and I only find LV22RFSTKAB. So I looked over the info and I am not sure but I think he is saying use the same valve body and...

I contacted Brand and Eric said that the valve I bought was wrong and can't be configured to work in my situation. So I put the old valve back on. Better to be safe,and smart then stubborn and sorry. Thank you for your experiance, knowledge, and advice. Gruh6

In case anybody gets into this situation here is what I found out. This is from Brand " The correct control valve is LV22TKRFA3BW , LV22TKSA3BW. They will attach all the necessary information to install it. I was in contact with Eric from Brand. The one I bought can't be configured to fit the...

Oh , I think I get what you are saying, there is an lv60 plate that will covert the action of the valve as if it were mounted on the side. I will go back to hydraulic supply and see if the part is available, thanks for helping me through this. I will check with brand they seem like they will be...

Thank you for all your time and knowledge. My choices have been narrowed, you confirmed my thoughts. Remount the valve on its side, replace the valve with the correct configuration to start with or stick the old valve back on. Which at tjis time seems to make the most sense. And since the...

LV22RFSTKAB LV22RFSTKAB

Yes b2 raise, a 1 lower.

It lays flat all hoses connect pointing up. Power beyond and return are on the side. I rechecked the connections and they follow the direction from brand. I can move the hoses around but was worried that the valve was designed only to operate the way it is discribed.

Looking at both pictures and the loader, I think it just reverses the operation. Instead of the lift being to the left and drop to the right it will be lift right and drop left, that is wrong, just a different wrong. My thought is the only way to get the valve to operate the same as the old...

Ok great. Should be interesting.

Ok great advice, I will see what it will take to either switch the control handle or reconnect the hoses. Although the valve is setup for the action the hoses are now connected to. Pull left lift,, push right drop, push up tilt forward dump , push down or pull back is tilt bucket back.

Thanks! Finally got out to mow the lawn.

Now it wil not go forward or reverse. I'm learning, check easy stuff first. Like take it out of neutral! One thing though,, the control valve works backwards. Wonder how the block valve got moved? Vibration?