GreensvilleJay's latest activity
-
GGreensvilleJay replied to the thread BX2816 Snowblower Bare metal in the impeller housing.speaking of grease... is that a Zerk on top of the worm/gear box that's never been greased ?
-
GGreensvilleJay replied to the thread Rear axle broke right inside cover.well you're one out of 1,000 that understands why FP isn't as good as the other 999 that think it is !
-
GGreensvilleJay replied to the thread Rear axle broke right inside cover.Dan sounds like you've never actually looked at how FP numbers are crunched inside any digital computers. There are lots of books you...
-
GGreensvilleJay replied to the thread Rear axle broke right inside cover.I don't think , I know the 'math' is. Have 5+decades cutting code in Assembler + 9 or 10 other languages. The root problem is that all...
-
GGreensvilleJay replied to the thread Rear axle broke right inside cover.I don't care how 'good' the FEA code is,it's still being run on digital computers with inherent,known flaws. The BEST ,most acurate...
-
GGreensvilleJay replied to the thread Chute Rotation on a BX2816 50" snowblower.query. do have the 3rd function option installed ??
-
GGreensvilleJay replied to the thread Rear axle broke right inside cover.Well I'm not a mechanical engineer but I'll assume 'they' are saying there's not enough 'meat' left in the axle after machining the hole...
-
GGreensvilleJay replied to the thread Wiring Diagram Wire Descriptions.yeah, area not diameter..silly Canada is 'kinda Metric', just like my BX23S ! Wonder if they squish the wires 'square' to make the...
-
GGreensvilleJay replied to the thread Wiring Diagram Wire Descriptions.OK, the those numbers are the for the wire diameter in mm. Don't feel to bad about it not being in the manual.. I went through the...
-
GGreensvilleJay replied to the thread Repair Plastic Fuel Tank on M7060.I have seen 'staples' that you heat melt into plastic to 'stitch' piece securely. I'd do that first the 'weld' new material over the...
-
GI'm never really sure which one I'm up without a paddle.
-
GGreensvilleJay replied to the thread Leveling out a field.I think running the BOG harrow. with dragging chains would be the best. Not too aggressive cutting angle and run N-S then E-W, repeat...
-
GGreensvilleJay replied to the thread BX22 Temp Gauge.this is for the BX22D, gauges look 'old skool' to me, remove the wires, undo 2 nuts, retainer comes off, meter pulls out ?
-
-
GGreensvilleJay replied to the thread Snow blower question.I made a gas powered, SSQA 48" snowblower 5 years ago, used ONCE. Then disassembled as not enough snow since. I do have a Craftsman...
-
GGreensvilleJay replied to the thread Snow blower question.1) snowblower 'should' have shoes or skids on it, same as walkbehind. 2) PTO shaft 'may' have to be cut to size. Test FULL range(up and...
