GreensvilleJay's latest activity
-
GGreensvilleJay replied to the thread Land Pride SGC0554 Claw Grapple Grinding Noise??.1st thing I saw was that some lazy SOB needs to snag HIS palm on one of those cotter pins and NOT have a box of bandaids real handy ...
-
GGreensvilleJay replied to the thread OEM Ignition Switch for ZD326 Worth the Extra $70+?.I've got 2 or 3 'tubes' of them here, industrial temp range.... still made, though cheaper to buy a PIC microcontroller !
-
GGreensvilleJay replied to the thread OEM Ignition Switch for ZD326 Worth the Extra $70+?.this .... ORL orange/black should probably be ORB orang/black , to be consistent with B being black....
-
GGreensvilleJay replied to the thread OEM Ignition Switch for ZD326 Worth the Extra $70+?.simply install a form B (normally closed) fuel valve in the fuel line. No power to it, NO fuel to Injpump, engine stops running.
-
GGreensvilleJay replied to the thread Box Trailer BX23S.YES, rear jacks are a must ! Also backup lights. SIMPLE with 7 wire hookups.2 per side(high and low)
-
GGreensvilleJay replied to the thread Box Trailer BX23S.You'll need one with two 3500# axles, best of brakes on BOTH axles. By 'box' do you mean enclosed' ?
-
GGreensvilleJay replied to the thread D902 3-Cyl PFR-KD Zexel Injection Pump Troubleshooting.This post is a great example as to why it's IMPORTANT to take 'before' pictures when disassembling ANYTHING and taking the time to...
-
GGreensvilleJay replied to the thread OEM Ignition Switch for ZD326 Worth the Extra $70+?.jumper whatever wire has +12 from battery to the 'start' wire.....starter should spin. If not, follow the 'start' wire and see where it...
-
GGreensvilleJay replied to the thread OEM Ignition Switch for ZD326 Worth the Extra $70+?.well it's only a 4 pronged switch, so not complicated. Hopefully you have the wiring diagram. It can't be too complicated.
-
GGreensvilleJay replied to the thread OEM Ignition Switch for ZD326 Worth the Extra $70+?.both switches might be made in China(seems 'everything' is...), so roll the dice on the $23 version. If buying through Amazon and 23...
-
GGreensvilleJay replied to the thread 2018 bx23s gauge cluster.Well maybe 'they' can't but..... from a 'computer' viewpoint.....assuming the CANbus port is available, it should be possible to...
-
GGreensvilleJay replied to the thread Using backhoe to push my L2502.I had a cheater stick on my BX23S, Use it press forward pedal. if you time it just right , engine doesn't die. Lost the stick in the...
-
GGreensvilleJay replied to the thread phone holder??.easy solution... when wife leaves give her the phone ! That way SHE can answer all those 'important' calls while you're busy cutting...
-
GGreensvilleJay replied to the thread Rear discharge MMM for tractors..hmm, one reason.. you'd be driving over the free cut clippings and bet that'd make a mess ?? It'd also cover the underbelly of the...
-
GGreensvilleJay replied to the thread Disassembling RC44/RC40 Mower Deck Gearbox.On a similar PITA 'project', I've had to take a NEW cold chisel and 2#H and 'cut' 1/3rd of an arc of the inner race off then the rest...