GreensvilleJay's latest activity
-
GGreensvilleJay replied to the thread Kubota M5700 AC Control Blowing Fuses.so... does the switch 'pop into' the square hole , with tabs to retain it there ? If so I used a lot of them decades ago, 7/8" square...
-
GGreensvilleJay replied to the thread Kubota M5700 AC Control Blowing Fuses.$97 is mighty pricey for a 10 amp switch ! Post a picture, has to be an economical part 'somewhere' ! Also post any markings like make...
-
GGreensvilleJay replied to the thread No work!.mew neither( had heat stroke in 2014, from what I was told....) meanwhile some fool is cutting his 3 acres of lawn in 100+ oh well....
-
GGreensvilleJay replied to the thread Kubota z275 blades not engaging help needed.Kubota usually have solid black wires as grounds. Simply follow the wire from connector.....
-
GGreensvilleJay replied to the thread M5400 won't start, have changed most everything.no, you need very little current ( say 1/10th of an amp to light up the dash but need 100s of AMPS to spin the starter. If you have...
-
GGreensvilleJay replied to the thread Dealer runaround?.curious. Why wouldn't Kubota FIX the KNOWN problem BEFORE selling the tractor ? Assuming it applies to ones in stock ? Seems kinda...
-
GGreensvilleJay replied to the thread Are all pallet forks created equal?.All of what Torch said !!! YES YES YES I have a set of HLA 42" pallet forks rated for 900# for my BX23S and they work GREAT ! When...
-
GGreensvilleJay replied to the thread M5400 won't start, have changed most everything.Replace both battery cables ! The clue is 'lights dim trying to start'. That show CURRENT is not passing from battery to starter.
-
GGreensvilleJay replied to the thread How to switch boom for stick control.I'm blocked too, probably cause I'm in Canada,eh !
-
GGreensvilleJay replied to the thread Frame Captive Nuts.looks like there's enough thread on that bolt to simple add a nut and tighten ???
-
GGreensvilleJay replied to the thread How to switch boom for stick control.Please, BEFORE you make the changes, BUY a pack of rainbow coloured tyraps !!! Put TWO of same colour on every hose, then take 2-3...
-
GGreensvilleJay replied to the thread Kubota Zero Turn ZD21F.curious I found this at the 'parts finder' website, might be of some help ? I assume #060 is the fuel to engine, the bigger pipe , the...
-
-
GGreensvilleJay replied to the thread Good running to bad in an instant.I suggest you pull the tank off and properly clean it. Yes, I know PITA, BTDT but it's the ONLY way to CLEAN the tank. You've got a 20...
-
GGreensvilleJay replied to the thread Front 3 point B4200.yes options 1) if it has SSQA loader, easy...off the shelf.... 2) make your own, fun project.....
-
GGreensvilleJay replied to the thread T1760 clicks but won't turn.Replace BOTH battery cables. That red one is very corroded for sure !
