Grandad4's latest activity
-
Grandad4 replied to the thread FEL while mowing..Actually it's the other way since the BX came after the B. The BX is a low rider B. -
I like to leave to loader alone and not mow. ;)
-
^All these, plus one more reason for me - visibility. The 50 acres I mow every year is very rough, with some big holes PLUS big mounds...
-
Grandad4 replied to the thread FEL while mowing..Loader and anything on the 3 pt always came off for mowing. Reasons: 1. Better ride and handling while mowing. 2. Less likely to take...
-
Grandad4 replied to the thread 3 pt movement speed..B 2 O: Did your previous NH maybe have "position control"? That give full, accurate hydraulic control of 3 point up/down movement and...
-
Grandad4 reacted to chim's post in the thread Front ballast for L4760 when using Woods TKP84.40 mower with
Like.
My next door BIL and I out mowing. -
I don't have a PTO driven mower, but I have found some long-lost wire, rope, and old garden hose over the years with my belly mower. Do...
-
Grandad4 replied to the thread Newbie in Western Carolina.Happy: Welcome here. You have a lot of good, honest advice here, maybe not all saying the same thing because everyone's situation is...
-
Grandad4 replied to the thread BX2200 belly mower.I had a BX2230, largely the same as the BX220. We changed over from belly mower to 3 point operation often as I never liked either...
-
You can very easily change an HST to be hand controlled, we have had several members that have done it over the years.
-
depends on your load your fuel state how many lefthanded vs righthanded screw drivers you got in the toolbox.... etc the variables...
-
Grandad4 replied to the thread Minumum tire spacing for safe operation of bush hog.Thinking about it a bit more, the 60 inch measurement would make sense if it was referring to the distance between the rear tires...
-
Grandad4 replied to the thread Minumum tire spacing for safe operation of bush hog.1.5 mm. = about 1/8 inch 1.5 meters, maybe? Which happens to be almost 60 inches!
-
While I have no specific data on tip over angles, I will throw out this, for what it is worth. In my rock crawler days, dashboard...
-
Grandad4 replied to the thread Kubota KH-027 info request.Shorthand: EX = excavator