Recent content by Gp10trainman

Thank you! That gives me some relief. Kubota shows 75545-63600 as the seal kit, however, the WSM shows 75545-63400 which looks like the correct kit. Guess I'll order one tomorrow and see.

I have opened the boom cylinders to reseal them and they were in bad shape. The inner seals on the Head were almost totally destroyed. In looking at the Kubota WSM drawings, it shows 3 seals. One would be a wiper, one a rubber seal and one a kinda flat seal. It does not show me how they are...

I have a B21 with FEL and Backhoe. I bought it with 30 hours on it 2004. It has been well cared for, but I am now replacing all of the Hydraulic hoses as 20 years is probably pushing it. I found a company called Universal Hose and Fittings (https://www.universalhoseandfittings.com) in Farmville...

I am replacing the hoses on my Kubota BT751 backhoe that I have owned since 2006. After much fuss, I got the cylinder out of the base arm along with all the hoses. The cylinder shows no leaks and looks good. As you know getting it out and back in is a chore. While out should I go ahead and...

Thanks Dan, maybe I won't have to go that route.

Thanks for the info. I had looked at the 3rd function solenoid, but thought they had to have a tank return also. If not, then it is a lot simpler. The PB on the FEL has a flex hose before it goes to steel headed to the BH, so its just a matter of routing that hose. Any particular brand you can...

I have a B21 commercial TL421 loader, BT751 backhoe. I want to add a FEL grapple with a valve control mounted on the ROPS cross bar. The FEL control valve looks to have a Power Beyond off the rear marked with green paint that goes to the backhoe. The pressure input and tank return to the FEL...