Recent content by genenj

the wire I'm looking at is red with a black stripe but not open ended. I'm thinking it is connected to a safety switch somewhere ( not the seat). Last resort, I may be the proud owner of a shop manual or just run new wires and try to keep it "pretty". Thanks all for the replies.

pump draw is less than an amp. currently running off a gel battery. thanks for the reply. I'll trace the wire to the fuse block and follow your suggestion.

HI All!! looking to add a 12v accessory outlet on the right rear fender. Got the wire harness and found the red wire with black stripe which is key switched. This connected back into the harness and goes....? Is the proper way just to run new wires to the fuse panel and avoid the wire...

Just saying HI!! Here's my Orange. Just 50 hours, I'll do the first maint this Spring. I,m sure I'll get a lot of good advice when the time comes. Looks like a few site sponsors will get my business.

Been away from the computer for a while. Picture shows tight space between R4 and the BH65. Maybe an inch.

if you have the BH65 backhoe and 12x16.5 R4s, the right rear clearance is very tight.

Thanks for the hints. My problem is packed snow more so than ice. The R4s and light weight tractor are a different adventure for me.

May I ask which chain pattern (ie. ladder, duo-grip, etc)

thx for the reply, trying to KISS. Now looks like a $600 investment.

after this last snow, thinking about chains for the rear of B2620, with loader and backhoe attachments. Tire clearance looks ok but do I need a wheel spacer kit? Anyone done this already?