Recent content by garyh

If it was a cracked head or blown gasket wouldn't I be loosing antifreeze? Also forgot to mention that a compression test was done recently and all cylinders were measuring 320.

Need a few suggestions before I start moving fuel injectors or take out the injector pump. Took off the exhaust manifold and white smoke poors out of cylinder 3 only but not all the time. Its real sporadic. What I mean is that the engine will run perfect no smoke for maybe 30 seconds to a...

After new piston rings my trucks 700 cca battery barely turns over this small engine. It spins fine in decompressed mode. As soon as I close it the battery can barely turn the engine over so not enough speed to get it started. Any suggestions? What is ironic is last night the tractor battery was...

I sprayed it heavily with Liquid wrench and let it sit overnight. It pulled off easily this morning. I did not have to remove any chains etc......Thanks all.

Really surprising because it moves all around like it was a ball joint. I pulled on it but it must be rusted solid to the spline. Time for liquid wrench and maybe some heat.

This is a B7100. I want to remove the loader shaft that drives the pump but I cannot see how it is attached to the pully.

I was probably wrong on the year of my tractor. The serial number on the tractor is B7001-55965. The serial # on the engine is 053731. What year does this make it? Would this make a difference in whether or not a loader on my tractor would fit on a 1994 Kubota b7100

I am considering buying a 1994 B7100 4x4 HST. I want to move the loader on my current 1974 Kubota B7100D 4x4 6 speed manual to the 1994 Kubota. Does anyone know if they changed the loader mounting holes, etc in the 1994 vs 1974, or can I simply unbolt and rebolt loader to the newer tracter. The...

Has anyone purchased the HF $30 diesel compression tester recently? Does it have the right fuel injection connector for a B7100?

Does anybody have any experience removing the oil pan on a B7100 4x4 non hst so I can get to the connecting rods. Some have said that the front axle needs to be dropped. If I have to drop the axle how hard is this to do?

The old washers came out with the fuel injector and new washers were installed. After replacing head gasket I am now getting fuel leakage around the injector lines leaving the pump so I will get new o-rings to stop that. I am also getting leakage where the fuel lines that screw into the top of...

around the piston closest to the dashboard was a little damp. Fuel injectors were rebuilt by pro shop recently. I was not loosing coolant. I need to figure out how I can do a compression test.

B7100D 4WD 3 cyl. mid 1960's hour meter has never worked All of a sudden white smoke pouring out of exhaust and immediate loss of power like now only running at 20% of original power. Smoke does not smell like antifreeze, smoke is not pure white more of a dirty white but not dark like...