FTG-05's latest activity
-
FTG-05 reacted to Mustard Tiger's post in the thread Any issue with adding a D-ring shackle to the rear frame where a hitch would go? with
Like.
Any issue with adding a D-ring shackle to the rear of the tractor where some would put a ball or a hitch receiver? I've seen people... -
https://www.orangetractortalks.com/forums/threads/irwin-xboom-coupler.62987/
-
FTG-05 reacted to North Idaho Wolfman's post in the thread Dang flat face quick connects. with Like.
When you take it off connect the two lines together then they won't lock up.
-
Rant on. Every time I want to use my grapple I have to think about it hard due to the almost impossible to press on flat face quick...
-
FTG-05 reacted to TheOldHokie's post in the thread 3rd function flat face couplers and grapple with Like.
Thats fine but with flat face couplers you dont need OEM numbers. All you need is body size and hose port type (NPT, ORB, etc). Kubota...
-
FTG-05 reacted to Russell King's post in the thread 3rd function flat face couplers and grapple with Like.
As North Idaho Wolfman stated just write the numbers down on the couplers. So you should be able to get four numbers. Take that to...
-
FTG-05 reacted to TheOldHokie's post in the thread 3rd function flat face couplers and grapple with Like.
Hydraulic couplers are classified by "body size" which is indicative of their "nominal" rated flow rate. All the industry standards do...
-
FTG-05 reacted to TheOldHokie's post in the thread 3rd function flat face couplers and grapple with Like.
The tractor side is 3/8" body size and grapple side is 1/2" body size. Most vendors let you choose what you want on the implement. I...
-
FTG-05 reacted to Old Machinist's post in the thread 3rd function flat face couplers and grapple with Like.
I guess I did misunderstand the problem. He didn't specify the third function connections were also flat face. Just that they were...
-
FTG-05 reacted to TheOldHokie's post in the thread 3rd function flat face couplers and grapple with Like.
I think you have things a bit confused. His loader does not have ISO 5675 (agricultural) couplers on it. It has ISO 16028 (flat face)...
-
FTG-05 reacted to Old Machinist's post in the thread 3rd function flat face couplers and grapple with Like.
My point is the flat face is supposed to be easier to connect than the ISO.. Doesn't matter if your connection is more capable than the...
-
FTG-05 reacted to TheOldHokie's post in the thread 3rd function flat face couplers and grapple with Like.
He has a 9 GPM tractor not a 20-40 GPM PM skidsteer. A 3/8" flatface is good for 12+ GPM which is more than his tractor can produce. Dan
-
FTG-05 reacted to TheOldHokie's post in the thread 3rd function flat face couplers and grapple with Like.
There is no standard but on a tractor of this size 1/2" couplers for a grapple are overkill. If the tractor side is smaller my guess is...
-
FTG-05 reacted to Gaspasser's post in the thread 3rd function flat face couplers and grapple with Like.
Thanks Dan. It seems I need to become a Kubota mechanic to be able to use my tractor efficiently, lol. So if I wanted to change out...
-
https://shop.kubotausa.com/oemparts/cl/kub/6091ae4b87a86614f81c3982/la240-hydraulic-system-parts?lid=6215e6487367254ceca37590 Looks...