Recent content by Farmer62

I also have an L 2250 and I am interested on how you mounted the front snowblower and how do you power it. A picture would be great.

Thank you for all the help. I ended up taking the hydraulic block off and cleaning it. When the tractor was split, a small amount of dirt must’ve gotten him somehow. Clean the pump added new fluid and it works like a charm.

I put in Travelers Premium 32, and was supposed to put in travelers Universal. Only two small steel hoses going to the back of the tractor that are bent and away, but they can only hook to the pump one way and there is one bigger hose. The FEL lines are done in such a way that you can’t mix them...

I have an L 2250 and just put in a brand new clutch. After reassembly, I decided it was a good time to change all my fluids. Two things happen. 1. I installed the wrong hydraulic fluid. 2. After installation of the wrong fluid, my tractor has power steering, but nothing for the three-point hitch...

I have stock 14” rims on my L2250 that are bad. I can purchase some used 14” that have a deeper off set. Basically the rim is 1 1/2” deeper from the valve side. Am I going to ruin anything going to a deeper offset?

Thank you Paul. Any help is much appreciated. Dwayne

New here today. I bought an old rusty L2250 for $800 and the front tires are bad (not worth putting tubes in) . Here is my issue, I looked up what tires it takes and it says 5-15. There are 6-14 tire on it now and when I look up 6-14 tires i get two differnet diameter sizes, 25.8" and 26.5" so i...

I just purchased an older L2250 I think it is a 1987 with 686 hours. I am looking to fin out where the fuse panel is. Thanks in advance.