Recent content by Eugene23

  1. E

    lower link bushings

    I'm back. tractor is 40 miles away, so took awhile to get to it. After reading Maple Leaf Farmer post, I've decided to go with the weld on https://www.agrisupply.com/lift-arm-ball-socket-cat-1-pin-7-8/p/106067/
  2. E

    lower link bushings

    Thanks for the link. That's what I need. Not sure if the size is right, and I do wonder how it is installed. Welded?
  3. E

    lower link bushings

    My lower link bushings are shot on my B2710 Kubota. There appears to be no available replacement bushings. This means that I would need to buy the whole lower link arms which is hundreds of dollars each. So I'm wondering what you folks would suggest as an alternative to purchasing the link...
  4. E

    b7100 HST overheating

    I did the temperature test on the radiator today. The top of the radiator got to over 200 degrees while bottom temperature were 120 or 130. This is all with no load on the tractor. FWIW, it only seems to overheat when mowing thick pasture grass.
  5. E

    b7100 HST overheating

    No pressure tester, but I did replace the radiator cap a few yeas ago. Radiator kind of 'burps' with cap off. fluid rises up and then drops. Again, oil looks fine, not milky. I will be working on it off and on as time permits. Thanks for the replies.
  6. E

    b7100 HST overheating

    My 95 b7100 with 800 hours seems to run fine, although it has thrown steam many times. I did the radiator test with radiator cap removed. The fluid level goes up and down and the bubbles do escape from the top at a random rate, on and off bursts. The tractor seems to lose coolant rapidly when...