Recent content by ES6100

Thanks for the feedback - I am ordering a compression test kit to check that. What sort of pressure should it normally run at? Ed

Thanks Dave. The glow plugs all measure 1.5 ohms - is this normal for these ones? The do power up ok on preheat although they read a couple of volts less than the battery voltage. Tappets have all been reset and fuel system bled up ok. All the pistons seemed ok and came up flush with the top...

I recently bought a B6100D as a none runner. The previous owner had been running it with a rotten radiator which caused the engine to over heat and the head to crack. He had fitted a new radiator and filled it with water which had then leaked through the crack into the cylinders. I have...