EPIC's latest activity
-
EI bought a KX040-4 with 1500ish hours. Good solid machine. It is located on property in the rocky mountains. About 20 acres more or...
-
EEPIC replied to the thread Welding thick metal.Stick or MiG will work…. Assuming you are not welding in a windy area. High winds can blow the shielding gas away. Concur with bevel...
-
EBevel and pre-heat. Lay it on thick with many passes.
-
EEPIC replied to the thread Mini excavator auger for a BX23s backhoe.They make different size augers that require different amounts of hydraulic flow, and can run different size bits. If you want to try...
-
EEPIC replied to the thread steering to the left constantly.Cars typically have a very slight toe in to help them track straight. your tractor probably doesn’t. Assuming both front and both rear...
-
EEPIC replied to the thread 3-Point core aerator?.I am far from an expert on aerators, but I had extremely compacted soils when I purchased my property in 2011, and all the research I...
-
EAnother thing to think about is ground clearance ... Mostly dependant on tire size ... And speaking of tire size ... Larger tires ride...
-
EEPIC replied to the thread KX040-5 tablet setup for Indeco Mulcher.Found some answers while adding the camera kit, which by the way was easy to do. The instructions to be the correct...
-
-
EEPIC replied to the thread 3-Point core aerator?.No idea about the land pride, but I have a 6’ model that does that I got from everything attachments about 10 years ago, use it 2-3...
-
EEPIC replied to the thread Flat face quick connectors for B2620.Is this what you are looking for? https://www.discounthydraulichose.com/2HTF2-HT2F2.html
-
EI disagree. I saved significant funds (about 50%) putting my front/rear hydraulics in myself AND I got exactly what I wanted rather than...
-
EEPIC replied to the thread Advice and pricing for newbie wanted..Also check numerous dealers, even if they are all part of the same company, you can sometimes save a substantial amount of $ and still...
-
EEPIC replied to the thread Attachment.I am sorry I can’t help, but just for fun I asked chat… this is it’s answer If you’re referring to the Kubota B2778 60-inch front...
-
EEPIC replied to the thread Flat Face Hydraulic Connector Help.Thanks… Actually have this document printed on my desk, just keep forgetting to take it home!
-
EEPIC replied to the thread KX040-4 vs KX 121-3.KX057 isn’t very likely to fit into dump trailer unless it’s very big with heavy axes. Even if you can actually get it in the dump...
