Recent content by Eneal65

  1. E

    Zero Turn Z122 E died while mowing

    I just checked continuity on the seat switch. The switch has four in-line posts vice stacked posts. The posts correspond to 1-4 in the connector. So I got continuity on posts 1&4 and 2&3 but only when the switch is depressed. I believe I should have had continuity on one set of connectors...
  2. E

    Zero Turn Z122 E died while mowing

    Turn and hold the key to start and cycle your PTO switch, see if it will crank. The PTO switch is usually the culprit. I did what you recommended (cycled the PTO switch while trying to start) and got the single click you mentioned. How do I test the seat switch? I have a fluke...
  3. E

    Zero Turn Z122 E died while mowing

    I will check the connections. Only clicks when I try to start it. Thank you for quick replies. I will work it tomorrow and post my results.
  4. E

    Zero Turn Z122 E died while mowing

    Background: I have 48 hours on motor. All services up to date. Battery good. Fuel good. I ensured brake was on, PTO secured, steering levers in neutral position, parking brake on. Would not start. Heard the usual clicking noise from starter solenoid (if there is one?). I checked all...
See more
Top Bottom